The IVAR.SR2 is a spiral heating coil made of externally finned copper tube that is inserted into the tank through the flange opening. The SR version is tinned and therefore intended for heating water for human consumption; the untinned IVAR.SA series is for heating water. With 1.80 m² of surface at a length of 470 mm it suits water heaters and buffer tanks with a Ø 290 mm flange.
The coil must be at least 10 cm shorter than the tank diameter. When inserting it, rest it on a plastic pad so that the copper does not damage the coating of the flange socket, then remove the pad. The plastic threaded spacers on the coil ends must not be removed, and the flow and return pipes must be firmly anchored before connection. The tank must be earthed whether or not an electric heater is fitted.
| Code | 4000608 |
| Manufacturer | IVAR |
| Type | IVAR.SR2 |
| Material | copper, tinned, externally finned |
| Heat transfer surface | 1.80 m² |
| Length L | 470 mm |
| Flange | Ø 290 mm (DN 200) |
| Connection | 3/4" |
| Weight | 13.4 kg |
| Dielectric kit | IVAR.KIT 500-5 (4000698) |
| Purpose | heating water for human consumption |
What is the difference between IVAR.SR and IVAR.SA coils? IVAR.SR coils are tinned and intended for heating water for human consumption. The untinned IVAR.SA coils are used for heating system water.
Which tank does the IVAR.SR2 fit? A Ø 290 mm (DN 200) flange is required. The coil must be at least 10 cm shorter than the tank diameter, so at 470 mm length the tank needs a diameter of at least 570 mm.
What is the dielectric kit for and is it included? The IVAR.KIT 500-5 kit electrically separates the copper coil from the steel flange and the pipes, protecting the tank against corrosion. According to the technical data sheet it is part of the coil; its plastic spacers must not be removed.
Ask MAX